Kismet v2016 Has 5 GHz?

The gear needed for wardriving

2 posts • Page 1 of 1

Postby sned » Mon Feb 08, 2021 6:44 pm

I have a Raspberry Pi 2 that I've installed version 2016 on. I can get it to work, however I can't seem to get any 5 GHz signals. Anybody know where I can chase this up to get it to work? I have no clue what is going wrong. I'm under the assumption it should work fine.

The antenna is a Antenna chip: Ralink 5370, MTK760, which has 5 GHz capabilities. It is SIMILAR to this unit: ... L05V8UFKHV

Everything seems legit, but I can't seem to find any 5 GHz channels. Also, the channellist entries in kismet.conf don't contain any 802.11n (5 GHz) channels. Not sure why this is the case. I've not read anything with regards to manually entering them.

Here is my kismet.conf:

Code: Select all

version=2009-newcore allowplugins=false # RF orig set to true preferredchannels=1,6,11 channelvelocity=5 channellist=IEEE80211b:1:3,6:3,11:3,2,7,3,8,4,9,5,10 channellist=IEEE80211a:36,40,44,48,52,56,60,64,149,153,157,161,165 channellist=IEEE80211ab:1:3,6:3,11:3,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64,149,153,157,161,165 listen=tcp:// allowedhosts=, maxclients=5 maxbacklog=5000 ouifile=/etc/manuf ouifile=/usr/share/wireshark/wireshark/manuf ouifile=/usr/share/wireshark/manuf ouifile=/Applications/ gps=false # RF gpstype=gpsd gpshost=localhost:2947 gpsmodelock=false gpsreconnect=true tuntap_export=false tuntap_device=kistap0 alert=ADHOCCONFLICT,5/min,1/sec alert=AIRJACKSSID,5/min,1/sec alert=APSPOOF,10/min,1/sec alert=BCASTDISCON,5/min,2/sec alert=BSSTIMESTAMP,5/min,1/sec alert=CHANCHANGE,5/min,1/sec alert=CRYPTODROP,5/min,1/sec alert=DISASSOCTRAFFIC,10/min,1/sec alert=DEAUTHFLOOD,5/min,2/sec alert=DEAUTHCODEINVALID,5/min,1/sec alert=DISCONCODEINVALID,5/min,1/sec alert=DHCPNAMECHANGE,5/min,1/sec alert=DHCPOSCHANGE,5/min,1/sec alert=DHCPCLIENTID,5/min,1/sec alert=DHCPCONFLICT,10/min,1/sec alert=NETSTUMBLER,5/min,1/sec alert=LUCENTTEST,5/min,1/sec alert=LONGSSID,5/min,1/sec alert=MSFBCOMSSID,5/min,1/sec alert=MSFDLINKRATE,5/min,1/sec alert=MSFNETGEARBEACON,5/min,1/sec alert=NULLPROBERESP,5/min,1/sec apspoof=Foo1:ssidregex="(?i:foobar)",validmacs=00:11:22:33:44:55 apspoof=Foo2:ssid="Foobar",validmacs="00:11:22:33:44:55,aa:bb:cc:dd:ee:ff" allowkeytransmit=true writeinterval=300 enablesound=false soundbin=play sound=newnet,true sound=newcryptnet,true sound=packet,true sound=gpslock,true sound=gpslost,true sound=alert,true enablespeech=false speechbin=flite speechtype=raw speechencoding=nato speech=new,"New network detected s.s.i.d. %1 channel %2" speech=alert,"Alert %1" speech=gpslost,"G.P.S. signal lost" speech=gpslock,"G.P.S. signal O.K." alertbacklog=50 logtypes=pcapdump,gpsxml,netxml,nettxt,alert pcapdumpformat=ppi logdefault=Kismet logtemplate=%p%n-%D-%t-%i.%l configdir=%h/.kismet/

Postby sned » Wed Feb 24, 2021 12:05 pm

Seems the antenna I was sold didn't have 5 GHz.


2 posts • Page 1 of 1

Return to “Net Hugging Hardware and Software”

Who is online

Users browsing this forum: No registered users and 1 guest