My RPi Setup

The gear needed for wardriving

4 posts • Page 1 of 1

Postby craftyza » Tue Nov 29, 2022 8:12 am

So a couple of months ago, I built up a wardriver with raspberry pi 3b+ and panda pau09 adapter.
The box is running a 7" touch screen 15Ah battery, and then running Kali Linux.
I've had a ton of fun with this setup as is. just airmon/wifite/airgeddon etc...
But I want to drive around and contribute to the wiggle map data in my area. A lot of it is out dated.
What application stack will I need for this that will work on Kali Linux?
(I do not have any android devices)
Guess I will have to get a GPS usb dongle as well?

Postby arkasha » Tue Nov 29, 2022 2:26 pm

we strongly recommend kismet (https://www.kismetwireless.net/) !

Postby craftyza » Tue Jan 10, 2023 6:38 pm

Ok, so finaly assembled this thing into a small neat box.
7" touch screen
u-blox7 GPS
Alpha AWUS1900 wifi
Kali Linux. This thing does more than just war driving. (all legal)
I'm finding it hard to get a complete setup instruction to configure kismet, record gps data, and merge all the info into a format that works for wigle.
If I can get a guide like this, I will create some python or sh scripts to tie all these loose bits into an easy to use solution and share it here

Postby arkasha » Wed Jan 11, 2023 3:36 pm

Looks like the wardriving mode docs for Kismet moved - https://www.kismetwireless.net/docs/rea ... /wardrive/ is the new location

4 posts • Page 1 of 1

Return to “Net Hugging Hardware and Software”

Who is online

Users browsing this forum: Ahrefs [Bot] and 4 guests